finishing wooden table top
Tabletop finishing: seal end grain. the end grain of wood soaks up finishes and often turns much darker than the face grain. check for this on your test block. if you get an ugly result, pretreat the end grain with a dose of finish that will limit absorption (wood conditioner, sanding sealer, shellac or polyurethane thinned 50 percent).. Shopping list for how to finish a wood table: - 120-, 150-, and 180-grit sandpaper [ https://amzn.to/31q4lb8 ], for smoothing the wood - oil-based wood conditioner , to pretreat the wood prior to. Sand the entire table removing all stain from edges and legs. if using an orbital or belt sander, be careful not to gouge the surface. do most of the initial sanding and varnish removal with the 100-grit sandpaper, then step up to 150-grit and do a final pass with 220-grit to smooth out the grain for the new finish..
finishing wooden table top
Step 1: apply the stripper. use a paint brush to apply an even coat to the wood surface. let the stripper do its work—generally 15 to 20 minutes for the solvent to loosen the finish.. To refinish a wood table, start by coating the table in stripper, waiting 15-20 minutes, and using a plastic scraper to take the paint or varnish off. when you’re done stripping the table, sand the surface in the direction of the grain to even out any discoloration or irregularities..
